APC InRow Specifications download pdf (Page 13)

990-4618C-001 InRow Chilled Water Air Conditioners Technical Specifications 7

Configurations

Chilled water systems utilize water from a chiller plant for cooling. Chilled water is commonly used in large

buildings and high rises and can serve multiple indoor units, which can be cost effective for large installation

options. There are various methods for chilled water piping.

Connection to chiller through CDU

Note: Install isolation valves and particulate strainers with 20 mesh stainless steel screen (opening size = 865 micron) in the

supply line between the chiller and CDU. For more information, see the InRow Installation Manual.

*PEX-AL-PEX Piping and CDU are optional products available through Schneider Electric. For more information, see the

CDU Technical Data Manual.

**Piping between Chiller and CDU will vary based on local codes and site conditions.

***Top piping connection is an optional configuration for this unit: bottom piping is the standard configuration.

Direct connection to chiller

Note: Install isolation valves and particulate strainers with 20 mesh stainless steel screen (opening size = 865 micron) in the

supply line between the chiller and RC.

Item Description Item Description



InRow RC



Strainer**



Interconnecting PEX-AL-PEX Piping*



Valve**



Cooling Distribution Unit (CDU)*

(ACRC301S only)



Chiller

Item Description Item Description



InRow RC



Chiller



Valve



Strainer

na1993a

CONNECTION

SHOWN IS TOP

PIPING***

na2826a

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 103 104

No comments

APC InRow Specifications Page 13