APC AP5202 User's Guide download pdf (Page 31)

®®

USER’S GUIDE

kvm switch

5. From your KVM switch console, activate the OSD (see OSD

Operation), and select the F4 ADM function.

6. Scroll to FIRMWARE UPGRADE, and press

ENTER.

7. Press

Y to activate the firmware upgrade mode.

Starting the upgrade

To upgrade your firmware:

1. Start the firmware upgrade program that you previously downloaded by

doing either of the following:

– Double-click the file icon.

– Click Start and then Run. Type the path to the file you want to open.

2. After the Firmware Upgrade Utility Welcome screen appears, read the

License Agreement. Select I Agree, and click Next. The Firmware

Upgrade Utility main screen appears.

3. Select the KVM devices, and click OK.

4. Click Next to perform the upgrade.

– If you enabled Check Firmware Version, the utility compares the

firmware version of the KVM Switch with that of the downloaded file.

If the device firmware version is higher, an alert message appears.

Click Yes to continue or No to cancel the downgrade.

The Utility inspects your installation. The Device List pane

displays all devices that can be upgraded.

If the utility detects more than one Master Device (the First

Stage KVM unit on a serial connection) in the system, an

alert message appears requiring you to select the Master

Device (and the KVM devices cascaded from it) that will

receive the upgrade.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 39 40

No comments

APC AP5202 User's Guide Page 31