APC AP5202 User's Guide download pdf (Page 5)

®®

USER’S GUIDE

kvm switch



Remote console To use a remote console, plug the serial cable into the RJ-45

connector. When both a local and remote console are present,

both can access the switch (not simultaneously).

Push the Disable Remote button to toggle between the remote

and the local console.

When the remote console is in control, you can only view through

the local console. When the local console is in control, you can

only view through the remote console.

The Local and Remote LEDs indicate which console is currently

in use.



RJ-11 serial port The firmware upgrade cable plugs into the RJ-11 connector and

transfers firmware upgrade data from the administrator's computer

to the KVM Switch.



Power LED Indicates when the KVM Switch is receiving power.



Station ID LED Displays the station number of the KVM Switch.



Firmware upgrade

reset switch

The reset switch is in NORMAL position during normal operation

or while performing a firmware upgrade. If the firmware upgrade

operation does not succeed, slide the reset switch to the

RECOVER position, turn the KVM Switch off, and then restart the

KVM Switch. Slide the reset switch back to the NORMAL position,

turn off the KVM Switch, and then restart the KVM Switch.

Item Description

1 2 3 4 5 6 7 8 9 10 ... 39 40

No comments

APC AP5202 User's Guide Page 5