APC Network Management Card AP9618 User's Guide download pdf (Page 5)

Installation and Quick Start 1

How to Avoid Equipment Damage

Disconnect UPS

power

You do not need to turn off a Symmetra

or a Silcon

model

UPS to install the Management Card.

Smart-UPS

1. Turn off the

equipment that

connects to the

UPS.

2. Disconnect the

UPS from its AC

input source.

3. Press the OFF

button on the

UPS for

approximately

five seconds to

turn off the DC

(battery) power.

Matrix-UPS

1. Turn off the

equipment that

connects to the

UPS.

2. Turn off the

circuit breaker on

the rear panel of

the UPS.

Disconnect

chassis power

Make sure that any Expansion Chassis or Triple Expansion

Chassis is disconnected from all power: disconnect the chassis

cable from the

UPS and, if the AC-to-DC Adapter (AP9505)

option is used, disconnect the adapter from the chassis.

Caution

Damage to the UPS or APC Network Management

Card (AP9617 or AP9618) can result if you do not

remove all AC and DC power from a Smart-UPS

or Matrix-UPS

, an Expansion Chassis, or a Triple

Expansion Chassis before you install the

Management Card.

Tes t

1 2 3 4 5 6 7 8 9 10 ... 25 26

Comments to this Manuals

No comments

APC Network Management Card AP9618 User's Guide Page 5

Comments to this Manuals

Related products and manuals for Networking APC Network Management Card AP9618