APC SmartSlot AP9604SR User's Guide download pdf (Page 12)

Quick Configuration

BOOTP. You can use an RFC951-compliant BOOTP server to

configure the TCP/IP settings the Management Card needs.

1. Enter the Management Card’s

MAC

and

addresses, the

subnet mask, and default gateway settings, and an optional

Bootup File Name in the

BOOTPTAB

file of the

BOOTP

server.

2. When the Management Card reboots, the

BOOTP

server

provides it with the

TCP/IP

settings.

– If you specified a bootup file name, the Management

Card will attempt to transfer that file from a

TFTP

FTP

server residing on the

BOOTP

server. The

Management Card will assume all settings specified in

the bootup file.

– If you did not specify a bootup file name, the

Management Card can be configured remotely by using

Telnet or by using the Web interface: User Name and

Password are both

apc

, by default.

See the Network Management Card Quality

Assurance slip for the

MAC

address.

You must use the

APC

Management

Card Wizard or the

APC

initialization

(*.ini) text-to-binary configuration

(*.cfg) conversion utility, i2c300, to

create the bootup file. To create a bootup

file, see the

BOOTP

section in the

Management Card Addendum

(.\doc\addendum.pdf).

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19

Comments to this Manuals

No comments

APC SmartSlot AP9604SR User's Guide Page 12

Comments to this Manuals

Related products and manuals for Power supply units APC SmartSlot AP9604SR