APC SmartSlot AP9604SR User's Guide download pdf (Page 8)

Expansion/Triple Chassis Installation

Overview

Use an Expansion Chassis or a Triple Expansion Chassis if the

UPS has no card slot available.

The Management Card installs in the chassis and

communicates with the

UPS

through the cable connection

between the chassis and the

UPS

When to use the

adapter

(AP9505)

Use the optional

adapter with a chassis under the following

circumstances:

• To connect the chassis to an independent AC input so

that the Management Card can continue to operate if the

UPS

is turned off or fails.

• To provide the

APC

management products mounted in a

Triple Expansion Chassis with more current than the

UPS

can provide through the

UPS

-to-chassis cable.

– A Silcon UPS provides up to 500 mA.

– A Matrix-UPS, Smart-UPS, or Symmetra provides up

to 200 mA.

For information about the current requirements for

APC

management products, do the following:

a. Go to APC’s Support page

b. Click the Knowledge Base link in the “Search the

Knowledge Base” section.

c. Use “current draw” as your search phrase.

d. Select the “Recommended connection order and

power requirements for APC SmartSlot accessories”

document.

Step 1:

Disconnect the

chassis from all

power

Make sure that the chassis is disconnected from any power

source: Disconnect the chassis cable from the

UPS

and, if the

UPS uses an

adapter, disconnect that adapter from the

chassis.

Note

Use only a Silcon Triple Expansion Chassis

(AP9604S) with a Silcon UPS.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 18 19

Comments to this Manuals

No comments

APC SmartSlot AP9604SR User's Guide Page 8

Comments to this Manuals

Related products and manuals for Power supply units APC SmartSlot AP9604SR