APC AP9290 Datasheet download pdf (Page 104)

USER’S GUIDE

Vertical Console Port Server

101

valid VCPS firmware image. After checks have been performed, an

MD5 hash is displayed. This MD5 hash must match the MD5 hash

from the .md5 file that accompanied the firmware image file.

9. In the control console, enter loadfw -w to write the firmware image to

the VCPS flash memory.

10. Enter reboot to have your changes take effect.

Download firmware from an FTP server

To download firmware from an FTP server:

1. In the control console, enter this command:

loadfw -f username[:password]@host:path [-p <portnum>]

This starts the FTP client on the VCPS and downloads the firmware to

/firmware/vcps.bin on the VCPS.

2. IIn the control console, enter loadfw -c to make sure the image is a

valid VCPS firmware image. After checks have been performed, an

MD5 hash is displayed. This MD5 hash must match the MD5 hash

from the .md5 file that accompanied the firmware image file.

3. In the control console, enter loadfw -w to write the firmware image to

the VCPS flash memory.

4. Enter reboot to have your changes take effect.

In the following example:

loadfw -w -f [email protected]5.7.30:/apc/apc_hw10_vcps_100_623.bin

– mtsmith is the username to access the FTP server (you will be

prompted for a password)

– 158.215.7.30 is the IP address of the FTP server. You could also

use DNS hostname.

– /apc is the directory path on the server

– apc_hw10_vcps_100_623.bin is the downloadable firmware

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 112 113

No comments

APC AP9290 Datasheet Page 104