15 NetShelter SX Cabinet - Installation and Customization Manual
Vertical Mounting Flange Adjustment
1. Use the provided TORX T30 tool to
loosen the top, middle, and bottom
TORX screws holding the vertical
mounting flange in place. The brackets,
all held in place by the TORX screws,
will now be loose. Move all three
brackets to the designated unlocked
position .
Note: The 600 mm and 750 mm wide cabinets have different brackets. See the illustrations below.
WARNING
FALLING EQUIPMENT
Remove all equipment installed on the vertical mounting flanges before performing any adjustments.
Failure to follow these instructions can result in serious injury or equipment damage.
600 mm wide cabinet 750 mm wide cabinet
15b
Comments to this Manuals