APC NetShelter VX Specifications download pdf (Page 17)

13NetShelter SX Enclosure: Unpacking, Installation, and Customization

Removing and Installing the Doors

Note: If the enclosures are joined together, see “Removing the Doors of Joined Enclosures”

on page 32.

Warning: To avoid personal injury or damage to the enclosure, one person should

support the door while another person removes the door from its frame.

Removing the doors

You can remove the front and rear doors of the enclosure to gain better access to equipment.

1. Disconnect the grounding wire.

2. Open the door to approximately 90

degrees and lift it up and off the hinges.

Installing the doors

1. Hold the door approximately 90

degrees to the frame of the

enclosure. Align the door hinges

with the hinge pins on the frame.

2. Lower the door onto the hinge

pins, making sure the pins engage

with the hinge barrels on the door.

3. Reconnect the grounding wire.

4. Make sure that the door opens and

closes properly.

ns0928a

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 43 44

No comments

APC NetShelter VX Specifications Page 17