APC BC300 Series User Manual download pdf (Page 4)

4 Installation Guide APC BC300 Series 40kW 208/450/480V UPS

990-1401

Introduction

1.0 Introduction

This Installation Guide provides information on UPS installation, wiring, start-up and shut-

down procedures along with Maintenance Bypass Panel phase check and external battery

installation.

Refer to national and local electrical codes prior to installing the UPS system.

1.1 Tools and Equipment Needed

This section lists all tools and equipment required to connect the UPS to the Maintenance

Bypass Panel.

Insulated Tools and Other Equipment Needed:

Cables and interconnection hardware is not provided by APC.

• Torque wrench in inch-pounds or

newton-meters

• Standard U.S. and metric wrenches

• Petroleum jelly or conductive grease

• Brush (for applying petroleum jelly or

conductive grease to battery terminals)

• Mallet

• Volt-Ohm meter (True RMS - Digital)

• Pliers

• Ratchet and sockets

• Electrical tape

• Standard and Phillips screwdrivers

• Torx head screwdriver set

• APC BC300 User Guide

• Phase rotation meter

1 2 3 4 5 6 7 8 9 ... 37 38

No comments

APC BC300 Series User Manual Page 4