APC AP9224 Datasheet download pdf (Page 25)

22 MasterSwitch VM: Installation and Quick Start Manual

Quick Configuration for Controller-based Systems

Through the Management Card Wizard. The MasterSwitch

VM controller contains a management card that provides the

network interface. The Management Card Wizard provides a

quick way to configure all management card settings, including

TCP/IP settings. To access the Management Card Wizard, run

the program wizard201.exe, supplied on the MasterSwitch VM

CD-ROM, and follow the on-screen instructions. You can use

the wizard on a workstation running Windows

95, Windows

98, Windows NT 4.0, or Windows 2000.

Serially through the Control Console. If you are not using a

Windows platform or require direct serial configuration, use

the Configuration port to configure MasterSwitch VM

management card

TCP/IP settings. To configure the settings,

perform the following steps:

1. Connect the supplied configuration cable (APC part

number 940-0144) to an available serial port on your

computer and to the Configuration port on the front panel

of the controller.

2. Disable any service that may be using the serial port on

the computer.

3. Run a terminal emulator such as Windows

HyperTerminal.

4. Configure the appropriate serial port with the following

settings: 2400 bps, no parity, 8 data bits, 1 stop bit, and

no flow control.

5. From your computer, press

ENTER until the user name

prompt appears.

6. Enter the default user name and password: apc, both

lowercase.

7. Once the Main menu appears, choose Network.

8. From the Network menu, choose TCP/IP.

Note

Some terminal emulators such as

HyperTerminal require that you disconnect

and reconnect in order for the new serial

settings to take effect.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

No comments

APC AP9224 Datasheet Page 25