APC MX06 50 User Manual download pdf (Page 9)

MX06 Power Plant User’s Manual Page 5

3 Installation

3.1. Unpacking Equipment

Remove equipment from packing material and inspect for shipping damage or missing items. It

is important to report damage or material shortages to the shipping carrier while a

representative is on site.

If concealed damage or material shortages are found at a later time, contact the shipper to

make arrangements for inspection and claim filing. Refer to Section 7 in the event it is

necessary to return equipment to APC.

CAUTION: Appropriate lifting techniques and safety equipment should be

used to remove equipment from packing.

PLEASE RECYCLE: The shipping materials can be recycled. Please save

them for later use or dispose accordingly.

3.2. Mechanical Installation

Room / Location

NOTE: The APC DC power plant is to be installed in a room, vault, or similar enclosure that is

accessible only to qualified persons in accordance with the regulatory authority having

jurisdiction.

Prior to installation, drawings, floor loading requirements, external alarm points, AC service

entrance, and grounding schemes should all be checked and confirmed. If batteries are to be

mounted in a room separate from the power plant, careful attention should be paid to battery

cable voltage drop effects. Environmental operating temperatures and ventilation/cooling

considerations should also be noted, not just for the power system but also for all other

equipment that may reside in the power room area.

Mounting

The MX06 provides brackets to mount on a standard EIA 19-inch or 23-inch rack. Install the

power system using hardware designed for the rack.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 36 37

No comments

APC MX06 50 User Manual Page 9