APC NETBOTZ NBRK0200 Specifications download pdf (Page 14)

NetBotz Rack Monitor 200 Installation and Quick Configuration Manual10

Connect an Alarm Beacon and Other Optional

Devices

1. To install an alarm beacon:

– Mount the alarm beacon in a visible position

either on the roof of the rack or inside the rack.

– Route the alarm beacon cable to the NetBotz 200.

The alarm beacon cable may be extended to a

maximum of 100 m (328 ft), using RJ-45

couplings and standard CAT-5 cables.

– Connect the cable to the Beacon port.

2. Connect one device to the Voltage Output.

Caution: The Relay Output is rated for Class 2 circuits only.

3. Connect one device to the Relay Output.

4. Connect a device to the Switched Outlet.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

No comments

APC NETBOTZ NBRK0200 Specifications Page 14