APC P D U User's Guide download pdf (Page 83)

USER’S GUIDE

Switched Rack PDU

SNMP traps

Trap Receivers (Administration>Notification>SNMP Traps>trap

receivers).

This option lists, by NMS IP/Host Name, up to the maximum number (six)

of trap receivers allowed.

• To open the page for configuring a new trap receiver, click Add Trap Receiver.

• To modify or delete a trap receiver, first click its IP address or host name to access its

settings. (If you delete a trap receiver, all notification settings configured under Event

Actions for the deleted trap receiver are set to their default values.)

• To specify the trap type for a trap receiver, select either the SNMPv1 or SNMPv3

radio button. For a NMS to receive both types of traps, you must configure two trap

receivers for that NMS, one for each trap type.

SNMPv1 option.

SNMPv3 option.

Select the identifier of the user profile for this trap receiver. (To view

the settings of the user profiles identified by the user names selectable here, choose

Network on the top menu bar and user profiles under SNMPv3 on the left navigation

menu.)

Item Definition

Trap Generation Enable (the default) or disable trap generation for this trap receiver.

NMS IP/Host

Name

The IP address or host name of this trap receiver. The default, 0.0.0.0,

leaves the trap receiver undefined.

Community Name The name ("public" by default) used as an identifier when SNMPv1 traps

are sent to this trap receiver.

Authenticate

Traps

When this option is enabled (the default), the NMS identified by the NMS

IP/Host Name setting will receive authentication traps (traps generated by

invalid attempts to log on to this device). To disable that ability, unmark the

checkbox.

See SNMPv3 (Administration>Network>SNMPv3>options) for

information on creating user profiles and selecting authentication

and encryption methods.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 124 125

No comments

APC P D U User's Guide Page 83