NetShelter VX 25U Enclosure 15
Vertical Mounting Rails
The vertical mounting rails are factory-installed in the proper position for use with rack-mountable
equipment that has a depth of 29.13 inches (740 millimeters).
To accommodate different rails or equipment with various
depths, you can adjust each rail from front to rear over a
range of 2.35 inches (60 millimeters).
How to adjust the mounting rails on the frame posts
1. Use the 5-mm hex wrench (provided) to loosen—but not remove—the four pan-head screws in
the slots of each vertical mounting rail.
2. Slide the rails forward or rearward. Use a level to make sure each mounting rail is vertical.
Tighten each screw.
2.35 in.
(60 mm)
Warn
ng
To avoid personal injury or damage to the enclosure, perform this procedure with
no equipment installed on the vertical mounting rails.
Comments to this Manuals