APC AR2105BLK Datasheet download pdf (Page 9)

Product Description: Before Installation

NetShelter VX 25U Enclosure 5

How to unpack the enclosure

1. Move the shipping pallet to a firm, level surface in an open area. Inspect the enclosure. If you

detect shipping damage, contact APC Customer Support at the number on the yellow sticker on

the front of the enclosure.

2. Remove the open-ended wrench from the pouch on the front of the packaging.

3. See the label on the packaging to determine where to cut the wrapping. Using sturdy shears or a

utility knife, carefully remove the plastic stretch wrap.

4. Remove the cardboard cover and the four cardboard corner protectors.

5. Remove the four brackets that anchor the enclosure to the shipping pallet. Use the 13-millimeter

end of the open-ended wrench to remove the bolts that secure the brackets to the pallet.

6. With one person on each side of the enclosure, carefully roll it toward the rear of the pallet until

the rear casters clear the back edge of the pallet. Continue to slide the enclosure rearward until

the rear casters touch the floor.

7. While one person carefully tips the enclosure slightly away from the pallet, have the other

person pull the pallet away from the enclosure.

Please recycle

Disclaimer

APC is not responsible for damage sustained during reshipment of this product.

Take inventory

After unpacking the enclosure, verify that all required components and hardware have been shipped

with the enclosure. See “Product Inventory” on page 2.

Note

Save the pallet if you plan to reship the enclosure.

The shipping materials are recyclable. Please save them for later use, or dispose

of them appropriately.

Note

If any items are missing, contact APC Customer Support at a number

listed on the back cover of this manual.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

No comments

APC AR2105BLK Datasheet Page 9