APC AR2105BLK Datasheet download pdf (Page 7)

NetShelter VX 25U Enclosure 3

Before Installation

Location of keys and mounting hardware

The keys are packed inside the enclosure, fastened at the top of one of the

mounting rails. The bag containing the mounting hardware is fastened to

the floor of the enclosure.

Tools provided

A 5-mm hex wrench and caged nut tool are in the bag with the mounting hardware, fastened to the

floor of the enclosure. A leveling and unpacking wrench is in the document pouch.

Tools required

The following tools (not provided) are necessary to unpack and adjust the enclosure:

Warn

Read all instructions thoroughly. Warning symbols indicate important

instructions that must be followed to prevent injury or damage.

• Use at least two people to unpack and assemble the enclosure.

• To prevent the enclosure from tipping over, stabilize the enclosure before

installing the components.

• Do not extend more than one component from the enclosure at one time.

• Load the heaviest components first, and place them toward the bottom of

the enclosure to prevent the enclosure from becoming top-heavy.

5-mm hex wrench Caged nut tool Leveling and

unpacking wrench

#2 Phillips screwdriver Utility knife Level

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

No comments

APC AR2105BLK Datasheet Page 7