APC ACRC103 Specifications download pdf (Page 29)

23InRow Half-Rack RC Installation

Power connections

Warning: The equipment has two power inputs for redundancy. Disconnect both before

performing any service.

Power cords may be routed through the top of the equipment (standard) or through the bottom (optional).

Top wiring configuration

(standard).

1. Route power cords

through the

equipment to the top

power cord access,

as shown.

2. Push the power cords

through the hole at

the top power cord

entrance.

3. Secure the plate to

the underside of the

equipment top with

four Phillips screws

(provided).

4. Secure the power

cords at appropriate

locations inside the

equipment using the

provided tie wraps.

Bottom wiring configuration (optional).

1. Remove the blank plate from the bottom power cord entrance. Save the plate and the four Torx

screws.

2. Route the power cords through the equipment to the bottom power cord access, as shown.

3. Feed the power cords through the hole at the bottom power cord entrance and secure the plate to

the bottom of the equipment with the four Torx screws you saved in step 1.

4. Secure the blank plate to the top power entrance with four Phillips screws (provided).

5. Secure the power cords at appropriate locations inside the equipment using the provided wire

ties.

na1581a

Plate

Bottom power entrance

Screws

Top power

cord entrance

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 43 44

No comments

APC ACRC103 Specifications Page 29