APC AIS 3000 User Manual download pdf (Page 43)

Electrical Installation – Input/Output Wiring – Dual Mains

AIS® 3000 10-30kVA, 208V, Site Preparation and Installation Manual – 990-1957 35



Punch 3 holes in the Conduit Box bottom to fit the size of the conduit pipes.



Attach the Conduit Box bottom to the Enclosure, using (4) M4x13 screws.



Install conduit pipes in the Conduit Box bottom.



Run cables through the conduit pipes and the bottom of the Conduit Box. Guide the cables up

into the input/output area.



Install the top part of the Conduit Box to the Enclosure.



Remove the (2) M6x12 screws from Brackets A, B, and C and remove all 3 brackets.



Attach the input cable lugs to input busbars L1, L2, L3, using the provided hex screws. Attach

the bypass cable lugs to L1, L2, L3 bypass busbars, using the provided hex screws. Attach the

output cable lugs to the L1, L2, L3 output busbars and attach, using the provided hex screws.

Attach N x 3 where shown., using the provided hex screws.



Attach Ground x 3 where shown.

 Reinstall the Plate, following reversed deinstallation procedures (described in a previous step).

Batt

Batt-

Ground

Neutral

Input

Bypass

Output

Plate covering cable

termination area







1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 57 58

No comments

APC AIS 3000 User Manual Page 43