APC SUVT10KF2B4S Datasheet download pdf (Page 36)

30 Smart-UPS® VT 10-30 kVA, 208/220 V Site Preparation and Installation Manual 990-1598B

Input/Output Wiring – Dual Mains

The UPS is designed for single mains installation as default. Follow the below instructions to install

the UPS in a dual-mains installation

Wiring procedure – dual mains



Loosen the (6) M4 screws from the cover of the cable termination area, and remove.



Loosen the (2) M4 screws (1 each side) from the top part of the Conduit Box. Loosen the M4

screws attaching it to the bottom part (2 screws in a 13.8 5in/352 mm Enclosure, 3 screws in a

20.59 in/523 mm Enclosure), and remove.



Loosen the (4) M4 screws (2 each side) from the bottom part of the Conduit Box and remove.

Note

The illustrations show 20.59 in/523 mm Enclosures, but the installation procedures are

identical for 13.85 in/352 mm Enclosures).





Bypass

Output

Input

Conduit box

(top part)

Conduit box

(bottom part)

EPO Conduit

MBP Conduit













1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 47 48

No comments

APC SUVT10KF2B4S Datasheet Page 36