APC ACF002 Datasheet download pdf (Page 17)

NetworkAir RM Air Distribution Unit 13

Installation

Installing the

blanking plate

1. Using the caged nut tool, install the caged nuts in the

corresponding mounting holes on the inside of each

vertical rail.

2. Attach the blanking plate, with the flange located at the

bottom, using the four, M6 × 12 mm, Phillips pan-head

screws and four, plastic washers.

Other openings For proper operation and maximum cooling, all other openings

in the enclosure should be covered using standard blanking

plates—(not provided).

ote

If the 3U position immediately above the Air

Distribution Unit is open, you must cover it with

the blanking plate provided for proper operation

and maximum cooling.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

No comments

APC ACF002 Datasheet Page 17