APC AP95500 Datasheet download pdf (Page 217)

Note: Setting the scan interval below the default

value of five minutes can adversely affect

performance when the StruxureWare Central

server is managing a large number of devices.

Supplemental OIDs option

Use this option to add supplemental OIDs that define sensors for monitored SNMP devices.

Once a supplemental OID has been added, the StruxureWare Central server will request

it for every SNMP device, with the supplemental OID value reported only by SNMP devices

that can report the sensor associated with that OID. This allows the server to monitor and

provide alert notifications for the supplemental OID the same way it does for any other

sensor for SNMP devices.

You use either the Other Numeric Sensors or Other State Sensors threshold option,

depending on the nature of the data provided by the supplemental OID, to configure alert

threshold settings for an SNMP device that has the type of sensor associated with the

supplemental OID.

Note: To add a supplemental OID, you need access to the Management Information Base

(MIB) that defines the OIDs available to the SNMP device.

Elements Description

OIDs

Identifies the existing supplemental OIDs.

Sensor Type: The type of sensor

(temperature, humidity, air flow, etc.) that

best matches the data reported by the OID.

Unit of Measure (only available when

Generic is the Sensor Type): The

appropriate unit or measurement (degrees,

seconds, volts, etc.) used when reporting

the sensor data.

OID: The definition of the OID to be

monitored for an SNMP device (for

example,.1.3.6.1.4.1.318.1.1.1.2.2.2).

Description: A description of the OID (for

example, UPS Temperature).

Add

Click to add a new supplemental OID.

Remove

Click to delete a selected supplemental OID.

"Add" Supplemental OID display

Use this display to add a supplemental OID for an SNMP device.

StruxureWare Central 6.3.0

217

1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 299 300

No comments

APC AP95500 Datasheet Page 217