APC Automatic Disconnect Switch User's Guide download pdf (Page 73)

USER’S GUIDE

AUTOMATIC TRANSFER SWITCH

Option Settings

TCP/IP

This option accesses the following settings:

• A Boot mode setting selects the method used to define the three

TCP/IP values that the Automatic Transfer Switch needs to operate on

the network:

– System IP: The IP address of the Automatic Transfer Switch

– Subnet Mask: The subnet mask value

– Default Gateway: The IP address of the default gateway

• Advanced settings define the Automatic Transfer Switch’s host and

domain names, as well as TCP/IP port, BOOTP, and DHCP settings

used by the Automatic Transfer Switch.

Current TCP/IP settings fields. The current System IP, Subnet Mask,

and Default Gateway values, along with the Automatic Transfer Switch’s

MAC Address, Host Name, Domain Name, and Ethernet Port Speed

values are displayed above the TCP/IP settings in the control console and

the Web interface.

For information about the watchdog role the default gateway

plays, see Resetting the network timer.

See also

For information about how to configure the initial TCP/IP

settings when you install the Automatic Transfer Switch, see

the Automatic Transfer Switch Installation and Quick Start

Manual (.\doc\en\insguide.pdf), provided on the APC

Automatic Transfer Switch Utility CD and in printed form.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 191 192

No comments

APC Automatic Disconnect Switch User's Guide Page 73