APC AP9470 Installation Manual download pdf (Page 27)

23InfraStruXure Central Installation Manual

E2017 Timer Fail

Timer refresh failure.

E2018 Prog Timer

Programmable interval timer error.

E2019 Parity Error

Parity error.

E201A SIO Err

SIO failure.

E201B Kybd Controller

Keyboard controller failure.

E201C SMI Init

System management interrupt (SMI) initialization failure.

E201D Shutdown Test

BIOS shutdown test failure.

E201E POST Mem Test

BIOS POST memory test failure.

E201F DRAC Config

Dell remote access controller (DRAC) configuration failure.

E2020 CPU Config

CPU configuration failure.

E2021 Memory Population

Incorrect memory configuration. Memory population order

incorrect.

E2022 POST Fail

General failure after video.

E2110 MBE Crd # DIMM ## &

One of the DIMMs in the set implicated by "## & ##" has had a

memory multi-bit error (MBE). If no memory card is present,

the "Crd #" string is left out of the message.

E2111 SBE Log Disable Crd #

DIMM ##

The system BIOS has disabled memory single-bit error (SBE)

logging, and will not resume logging further SBEs until the

system is rebooted. "##" represents the DIMM implicated by the

BIOS. If no memory riser card is present, the "Crd #" string is

left out of the message.

E2112 Mem Spare Crd # DIMM

The system BIOS has spared the memory because it has

determined that the memory had too many errors. "## & ##"

represents the DIMM pair implicated by the BIOS. If no

memory card is present, the "Crd #" string is left out of the

message.

E2113 Mem Mirror Crd # DIMM

## & ##

The system BIOS has disabled memory mirroring because it has

determined that one half of the mirror has had too many errors.

"## & ##" represents the DIMM pair implicated by the BIOS. If

no memory card is present, the "Crd #" string is left out of the

message.

E2118 Fatal NB Mem CRC

One of the connections in the Fully Buffered DIMM (FBD)

memory subsystem link on the Northbound side has failed.

E2119 Fatal SB Mem CRC

One of the connections in the FBD memory subsystem link on

the Southbound side has failed.

I1910 Intrusion

System cover has been removed.

I1911 >3 ERRs Chk Log

LCD overflow message.

A maximum of three error messages can display sequentially on

the LCD. The fourth message displays as the standard overflow

message.

I1912 SEL Full

System Event Log is full of events, and is unable to log any

more events.

W1228 ROMB Batt < 24hr

Warns predictively that the RAID battery has less than 24 hours

of charge left.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments

APC AP9470 Installation Manual Page 27

Comments to this Manuals

Related products and manuals for Networking APC AP9470