APC Network Management Card AP9617 Specifications download pdf (Page 19)

Installation and Quick Start 15

Quick Configuration

Local access to

the control

console

You can use a computer connected to the serial port on the

front of the Management Card to access the control console.

1. Select a serial port at the local computer, and disable any

service that uses that port.

2. Use the configuration cable to connect the selected port

to the serial port on the front panel of the Management

Card. Use either 940-0024C, the 6-ft cable that came

with your UPS, or AP9804 (990-1524), the 15-ft cable

available from APC.

3. Run a terminal program (such as HyperTerminal) and

configure the selected port for 2400 bps, 8 data bits, no

parity, 1 stop bit, and no flow control. Save the changes.

4. Press

ENTER to display the User Name prompt.

5. Use apc for the user name and password.

Remote access

to the control

console

From any computer on the same subnet as the Management

Card, you can use ARP and Ping to assign an IP address to a

Management Card, and then use Telnet to access its control

console and configure the other TCP/IP settings.

1. Use the Management Card’s MAC address in the ARP

command to define the IP address.

For example, to define 156.205.14.141 as the IP address

of a Management Card with 00 c0 b7 63 9f 67 as its

MAC address., use one of the following commands:

– Windows command format:

arp -s 156.205.14.141 00-c0-b7-63-9f-67

– LINUX command format:

arp -s 156.205.14.141 00:c0:b7:63:9f:67

See “Control console” on page 16 to finish the

configuration.

Note

After a Management Card has its IP address

configured, you can use Telnet, without first using

ARP and Ping, to access that Management Card.

Note

For the MAC address, look on the bottom of

the Management Card or on the Quality

Assurance slip included in the package.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Comments to this Manuals

No comments

APC Network Management Card AP9617 Specifications Page 19

Comments to this Manuals

Related products and manuals for Networking APC Network Management Card AP9617