APC Network Management Card AP9618 User's Guide download pdf (Page 20)

16 Installation and Quick Start

Quick Configuration

2. Use Ping with a size of 113 bytes to assign the IP address

defined by the ARP command. For the IP address

defined in step 1, use one of the following Ping

commands:

– Windows command format:

ping 156.205.14.141 -l 113

– LINUX command format:

ping 156.205.14.141 -s 113

3. Use Telnet to access the Management Card at its newly

assigned IP address. For example:

telnet 156.205.14.141

4. Use apc for both user name and password.

5. See “Control console” on page 17 to finish the

configuration.

Note

For the MAC address, look on the bottom of

the Management Card or on the Quality

Assurance slip included in the package.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26

No comments

APC Network Management Card AP9618 User's Guide Page 20