APC Metered Rack User's Guide download pdf (Page 33)

Command Reference: Switched Rack PDU

Command Line Interface (CLI) User’s Guide 29

pducoldstartdelay

Syntax (to read the cold-start delay):

pducoldstartdelay

Syntax (to set the cold-start delay):

pducoldstartdelay {time|never}

Description: Set or read the PDU cold-start delay

(the time that the Switched Rack PDU delays

applying power to the outlets after AC power has

been applied to the Switched Rack PDU).

Access: Administrator and device manager

(device-only user)

Parameters:

Output format, reading the cold start delay:

OK

PDU_name: PDU coldstart delay is time seconds.

Output format, setting the cold start delay:

OK

PDU_name: Setting PDU coldstart delay to time

seconds.

Error Messages: E101, E104

power

Syntax:

power

Description: Reads the total power usage of the

Switched Rack PDU in watts and volt-amps.

Parameters: None.

Access: All three user types with access to the

CLI.

Output Format:

OK

power_in_volt-ampsVA

power_in_wattsW

Error Message: 101

time The cold-start delay in seconds to set for the

Switched Rack PDU. Allowed values are 0

through 300.

never Sets the Switched Rack PDU to keep its

outlets turned off after power is applied until

the outlets are explicitly turned on by the on

command.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39

Comments to this Manuals

No comments