APC Rack PDU, Metered, Zero U, 5.7kW, 120V User's Guide download pdf (Page 11)

Metered Rack Power Distribution Unit 7

Display Interface Operation

Link - Rx/Tx

100

Status

Serial Port

Reset

Press and hold

to invert display.

- War ning

- OK

- Overload

Amps

Metered Rack PDU

— TOTAL —

B1 B2

Press to

select bank.

pdu0291a



Bank/phase indicator LEDs:

• Indicate the bank/phase corresponding to the current

listed in the digital display.

• Indicate normal (green), warning (yellow), or alarm

(red) condition.

OTE: If all indicator LEDs are lit, the Rack PDU is

in use at its maximum capacity.



Control button:

• Press to change the bank/phase of the current

displayed on the digital display.

• Press and hold for five seconds to view the

orientation of the display; hold for an additional five

seconds to change the orientation.



Ethernet port: Connects the PDU to your network,

using a CAT5 network cable.



Status LED: Indicates the status of the Ethernet LAN

connection and the state of the PDU.

• Off–The PDU has no power.

• Solid green–The PDU has valid TCP/IP settings.

• Flashing green–The PDU does not have valid TCP/

IP settings.

• Solid orange–A hardware failure has been detected

in the PDU. Contact Customer Support at a phone

number on the back cover of this manual.

• Flashing orange–The PDU is making BOOTP

requests.



Link LED: Indicates whether there is activity on the

network.



Serial port: Access internal menus by connecting this

port (RJ-11 modular port) to a serial port on your

computer, using the supplied serial cable (part number

940-0144).



Display of the current used by the PDU and attached

devices:

• Shows the aggregate current for the bank/phase

corresponding to the Bank/Phase Indicator LED that

is illuminated.

• Cycles through the banks/phases in 3-second

intervals.



Reset switch: Resets the PDU without affecting the

outlets.

Comments to this Manuals

No comments

APC Rack PDU, Metered, Zero U, 5.7kW, 120V User's Guide Page 11

Comments to this Manuals

Related products and manuals for Power distribution units (PDUs) APC Rack PDU, Metered, Zero U, 5.7kW, 120V