APC MGE Galaxy 3500 Extended Run Frame Specifications download pdf (Page 10)

MGE™ Galaxy™ 3500 10-40 kVA 380/400/415 V, 10-30 kVA 208/220 V Battery Installation6

Remove the cable landing cover and bottom plates

To access the cable landing area in the UPS and the XR Battery Enclosure(s), follow this procedure:

1. Loosen the six M4 screws from the cable landing cover plate on the UPS and the XR Battery

Enclosure(s) and then remove the plates.

2. Remove the screws from the bottom plate on the UPS and the XR Battery Enclosure(s) and then

remove the plates.

3. Punch holes in the bottom of the conduit boxes (optional for 380/400/415 V) to fit the size of the

conduit pipes.

Note: The conduit box is not included in 380/400/415 V versions, but can be purchased

(SUVTOPT001: 10-20 kVA UPS, SUVTOPT002: 10-40 kVA UPS plus XR Battery

Enclosure).

4. Attach the bottom part of the conduit boxes to the back of the UPS and the back of the XR

Battery Enclosure, respectively with four screws each (if applicable). The bottom part of the

conduit box is secured to the enclosure with four screws.

















Bottom plate

Conduit box

(bottom part)

Conduit

box (upper

part)

Cable

landing

cover plate

Conduit box

(bottom part)

Conduit

Box

(upper

part)

Cable

landing

cover

plate

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

No comments

APC MGE Galaxy 3500 Extended Run Frame Specifications Page 10