®
USER’S GUIDE
Vertical Console Port Server
3
Installation and Configuration
Set-up and Configuration
Initial set-up
If you are not using DHCP (enabled by default) you must define three
TCP/IP settings for the VCPS before it can operate on the network:
• IP address of the VCPS
• Subnet mask
• IP address of the default gateway
How to log on
You can use either a local (serial) connection, or a remote (Telnet or SSH)
connection to access the control console.
Use case-sensitive user name (login) and password entries to log on (by
default, apc and apc for the Permanent Administrator).
To use a DHCP server to configure the TCP/IP settings for a
VCPS, see DHCP and BOOTP configuration.
If you cannot remember your login or password, see How to
recover from a lost password.
Comments to this Manuals