APC AP9290 Datasheet download pdf (Page 7)

USER’S GUIDE

Vertical Console Port Server

Remote access to the control console

You can access the CLI through Telnet or SSH, depending on which is

enabled. (An administrator can enable these access methods through the

CLI.) Both Telnet and SSH are enabled by default.

Local access to the control console

You can use a local computer to access the control console.

1. Select a serial port such as COM1 or COM2 at the local computer and

disable any service which uses that port.

2. Connect the cable (APC part number 940-0214) to the selected port at

the local computer and to the configuration port of the VCPS.

3. Run a terminal program (such as HyperTerminal

), and configure the

selected port as follows:

– 9600 bps

– 8 data bits

–no parity

– 1 stop bit

– no flow control

Save the changes.

4. Press

ENTER to display the login prompt.

5. Enter your user name and password.

See Telnet and SSH for details on how to use these protocols

to access the control console.

1 2 3 4 5 6 7 8 9 10 11 12 ... 112 113

No comments

APC AP9290 Datasheet Page 7