APC NetShelter VX Specifications download pdf (Page 23)

19NetShelter SX Enclosure: Unpacking, Installation, and Customization

3. To align the vertical mounting flanges properly,

note the symbol (for example, the diamond)

visible through the one of the holes on the top of

the flange, and ensure that the same symbol is

visible through the corresponding hole at the

bottom of the flange. Only one symbol is visible

at a time through any of the holes. In the

factory-standard position, the circles are visible

through two of the holes.

On the 750-mm rack there are circles 476 mm

(18.75 in) behind the front mounting flange

designating the location for networking and

telecommunications equipment.

Note: Vertical mounting flanges adjust in 6-mm (1/4-in) increments.

Note: Vertical mounting flanges placed across from each other must have the same

visible symbol.

4. When the vertical mounting flange is in the proper

location, slide each screw up until the teeth in the

bracket engage fully with the teeth in the side brace,

and tighten the screws.

ns0719a

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 43 44

No comments

APC NetShelter VX Specifications Page 23