APC ACRC103 Specifications download pdf (Page 26)

InRow RC Operation and Maintenance18

Set Up the Display

Set display settings including the time and date, temperature units, passwords, and time-out settings.

Password and time-out

Path: Main > Set Password

Note: The default user password is apc (lower case). See “Password entry” on page 6 for more

information on how to enter the password.

Change passwords.

1. Move the selector arrow next to the Change Passwords option and press the ENTER key.

2. If there has not been a keypress and the Password time-out has elapsed, you will be prompted to

enter your current Admin password. Enter your password and press the

ENTER key to return to the

Change Password screen. Press the

ENTER key again.

3. Select the password to change (either Admin or Device).

4. Enter a new password (up to 8 characters).

5. Press the

ENTER key to confirm.

Password time-out. Set the Time-out period during which settings can be changed after the password

is entered. After the period has elapsed without a keypress, password entry will be required and the

display interface will return to the scrolling status screens.

Invalidate Password. Override the password time-out and require password entry again with the

Invalidate NOW option.

Date and time

Path: Main > Set Date & Time

Set the date. Enter the day, month, and year (format: dd/mm/yyyy), and press the ENTER key. The date

is displayed on some status screens and is also used in the alarm/event log to date-stamp events.

Set the time. Enter the correct time, and press the ENTER key. The time is displayed on some status

screens and is also used in the alarm/event log to time-stamp events.

Screen visibility and audible tones

Path: Main > Configure Display

Contrast.

Adjust the visibility of the screen text. Lower numbered settings provide darker text; higher

numbers provide lighter text. Settings range from 0–7.

Key Click. Enable or disable the audible tone that sounds every time a key is pressed on the display

interface.

Beeper Volume. Set the volume of the audible tone that sounds every time a key is pressed on the

display interface or when an alarm has occurred.

Beep On Alarm. Set the equipment to sound an audible tone every 30 seconds when a new alarm

occurs. Silence the audible tone by pressing any key on the display interface. When the alarm clears

itself, the tone will stop on its own.

Units of measure

Path: Main > Set Display Units

Set the units of measure for the cooling unit to either US or metric.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 55 56

Comments to this Manuals

No comments

APC ACRC103 Specifications Page 26

Comments to this Manuals

Related products and manuals for Split-system air conditioners APC ACRC103