Apc NETBOTZ NBRK0200 User Manual download pdf (Page 14)

NetBotz Rack Monitor 200 Installation and Quick Configuration Manual10

How to Connect Sensors to Universal Sensor Ports

This procedure applies to the following sensors, which are supported by the Rack Monitor 200 and

connect to the universal sensor ports:

• Temperature Sensor (AP9335T)

• Temperature/Humidity Sensor (AP9335TH)

• NetBotz 3.65-m (12-ft) Door Switch Sensor for APC Racks (NBES0303)

• NetBotz 15.24-m (50-ft) Door Switch Sensor for Rooms or Third Party Racks (NBES0302)

• NetBotz Dry Contact Cable (NBES0304)

For sensors that connect to A-Link ports (Temperature Sensors with Digital Display

[AP9520T] and Temperature/Humidity Sensors with Digital Display [AP9520TH]), see “How

to Cascade Devices to A-Link Ports” on page 12.

Caution: Plugging an incompatible sensor into a port can result in undefined behavior.

Connect APC and third-party dry contact sensors to the six universal sensor ports, labeled Sensors, on

the Rack Monitor 200.

• Third-party dry contact sensors require the NetBotz Dry Contact Cable (NBES0304). To connect

a sensor to the cable, follow the instructions provided with the sensor and the instructions

provided with the cable.

• The length of a sensor cable can be extended using RJ-45 female-to-female couplings and

standard CAT-5 cabling. See “System Specifications” on page 24 for maximum cable lengths.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

No comments

Apc NETBOTZ NBRK0200 User Manual Page 14