APC J15BLK Datasheet download pdf (Page 30)

2-8

SYSTEM LOAD: <XXXW; LOAD: <XXX%

This screen is shown in Figure 12. The J10 and J15 can also display the value (load)

of the connected equipment in watts, as well as a percentage of the total allowable

load connected to the unit. Loads less than 5% of rated load (35 watts for the J10;

45watts for the J15) will be displayed as < 5%.

Figure 12. SYSTEM LOAD: <XXXW; LOAD: <XXX% Screen

EST. RUNTIME: XHRS; FUEL: XXX%

This screen is shown in Figure 13. Each unit can also display the

Estimated

Runtime

(in hours), as well as the

Fuel

capacity of the battery (as a percentage)

based on the total load connected to the device. If the estimated runtime is < 1 hour,

the

Estimated Runtime

will show in minutes.

Figure 13. EST. RUNTIME: XHRS; FUEL: XXX% Screen

Note: For convenience, you can set the unit to display any of the screens as the

“default” screen. The “default” screen is the screen that the system will

revert to once the preset time has expired for other screens being

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 55 56

No comments

APC J15BLK Datasheet Page 30