APC S15 Operations Instructions download pdf (Page 27)

2-3

4. Slide the unit into the rack so that the cleats mounted on the side of the unit fit within

the track of the rack-mount rails. If the ears were mounted, screw the mounted ears

into the rack to lock unit into position. (See the installation sheet located in the box

marked, “Accessories.”)

Note: Avoid placing other components directly on top of or behind the unit.

Leave at least one inch of space on all sides to allow for proper air

ventilation. Do not block the fan.

Inserting and Connecting the Battery

In accordance with APC’s interpretation of Department of Transportation

regulations, APC ships this device with the internal battery pack disconnected. The

front bezel of the unit is also not attached to the unit when shipped.

This procedure provides for connection of the battery when the front bezel has been

prematurely installed onto the chassis. Connect the internal battery pack as follows:

1. Grasp the front panel at the sides (Figure 4), and pull the front bezel from the unit.

Figure 4. Front Bezel Removal

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 59 60

No comments

APC S15 Operations Instructions Page 27