APC S15 Operations Instructions download pdf (Page 44)

2-20

BATREPDATE: XX/XX/XX Setting (Figure 28) — lets you input the exact date a

replacement Battery Pack was installed in the unit. First, use the Up/Down Arrow

push buttons to set the correct month, then press the SETUP push button to move

the cursor to the day of the month field. Set the day of the month using the Up/Down

Arrow push buttons. Again, press the SETUP push button to move the cursor to the

year field, then set the year using the Up/Down Arrow push buttons.

Figure 28. BATREPDATE: XX/XX/XX Setting Screen

DO QUIK SELFTEST screen (Figure 29) — lets you manually initiate a self-test to

ensure that the battery pack is in good health and that the unit is operating properly.

Note: Once you advance to this screen, press either Up/Down Arrow push buttons

to start the Selftest. During the Selftest, the same screens as previously defined in

this manual, are displayed.

Figure 29. DO QUIK SELFTEST Screen

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 59 60

No comments

APC S15 Operations Instructions Page 44