APC Smart-UPS On-Line Installation Guide download pdf (Page 21)

Smart-UPS On-Line SRT5K/6K Tower/Rack-Mount 3U/4U 21

The icons on the LCD display interface screen may vary depending on the installed firmware version.

Load icon: The approximate load capacity percentage is indicated by the number of load bar

sections illuminated. Each bar represents 16% of the load capacity.

Mute icon: Indicates the audible alarm is disabled/mute.

UPS Status Information

The status information field provides key information on the status of the UPS.

The Standard menu will allow the user to select one of the following screens.

The Advanced menu will scroll through the following five screens.

Input Voltage

Output Voltage

Output Frequency

Load

Runtime

In the case of a UPS event, status updates will be displayed defining the event or condition that has occurred.

The display screen illuminates yellow to indicate a Warning and red to indicate an Alert depending on the severity of the event

or condition.

Operation Mode Icons

On-Line mode: The UPS is supplying conditioned mains power to connected equipment.

Bypass mode: The UPS is in Bypass mode and the connected equipment will receive mains power

as long as the input voltage and frequency are within the configured limits.

Green mode: When in Green mode mains power is sent directly to the load.

In the event of a mains power outage, there will be an interruption in power to the load of

up to 8 ms while the UPS switches to On-Line mode.

When enabling Green mode consideration should be given to devices that may be sensitive to

power fluctuations.

Battery mode: The UPS is supplying battery power to connected equipment.

Controllable Outlet Group Icons

Controllable Outlet Group Power Available: The number next to the icon identifies the specific

outlet groups that have available power.

Controllable Outlet Group Power Not Available: The number next to the icon identifies specific

outlet groups that do not have available power.

Battery Status Icons

Battery Charge Status: Indicates the battery charge status.

Battery Charge In Progress: Indicates the battery is charging.

LOAD

1 2 ... 16 17 18 19 20 21 22 23

No comments

APC Smart-UPS On-Line Installation Guide Page 21