APC Smart-UPS X-Series Specifications download pdf (Page 13)

Smart-UPS X-Series Operation10

Network Management Card Settings

These settings are available only on units that have a Network Management Card (NMC) and are set in

the factory. These settings can only be modified using an external interface, like the NMC web interface.

• NMC IP Address Mode

• NMC IP Address

• NMC Subnet Mask

• NMC Default Gateway

Load Shed Time

when On Battery

Disabled 0-32767 sec The amount of time the outlets will function on

battery power before they will turn off.

Load Shed On

Runtime

Disabled • Shutdown with

delay

• Shutdown

immediately

• Turn off

immediately

• Turn off with

delay

• Disabled

When the battery runtime falls below the

specified value, the Controllable Outlet Group

will turn off.

Configure this time using the

LOAD SHED

UNTIME REMAINING setting.

Load Shed On

Runtime

Remaining

Disabled 0-32767 sec When the remaining runtime reaches this level,

the Controllable Outlet Group will turn off.

Load Shed on

Overload

Disabled • Disabled

• Enabled

(Applicable only for Controllable Outlet

Groups, not the UPS outlets.) When enabled,

the Controllable Outlet Group will turn off

immediately in the event of a power outage

and will have to be manually restarted.

Function Factory Default Options Description

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

APC Smart-UPS X-Series Specifications Page 13

Comments to this Manuals

Related products and manuals for Uninterruptible power supplies (UPSs) APC Smart-UPS X-Series