APC SUA500PDR User Manual download pdf (Page 6)

User Configurable Items

UPS settings

Settings are adjusted through PowerChute software or optional Network Management Card.

Function

Factory

Default

User Selectable

Choices

Description

Automatic

Self-Test

Every 14 days

(336 hours)

• Every 7 days

(168 hours)

• On start up only

• No self-test

Set the interval at which the UPS will execute a

self-test.

UPS ID UPS_IDEN Up to eight characters

(alphanumeric)

Uniquely identify the UPS (i.e. server name or

location) for network management purposes.

Date of Last

Battery

Replacement

Manufacture

Date

mm/dd/yy Reset this date when you replace the battery

module.

Minimum Capacity

Before Return from

Shutdown

0 percent • 0%

• 15%

• 30%

• 45%

• 60%

• 75%

• 90%

Specify the percentage to which batteries will

be charged following a low battery shutdown

before powering connected equipment.

Voltage Sensitivity High sensitivity High sensitivity

Medium sensitivity

Low sensitivity

The UPS detects and reacts to line voltage

distortions by transferring to battery operation

to protect the connected equipment.

In situations of poor power quality, the UPS

may frequently transfer to battery operation. If

the connected equipment can operate normally

under such conditions, reduce the sensitivity

setting to conserve battery capacity and service

life.

Alarm Delay

Control

Enable • Enable

• Mute

• Disable

Mute ongoing alarms or disable all alarms

permanently.

Shutdown Delay 90 seconds • 0 s

• 90 s

• 180 s

• 270 s

• 360 s

• 450 s

• 540 s

• 630 s

Set the interval between the time when the UPS

receives a shutdown command and actual

shutdown.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments

APC SUA500PDR User Manual Page 6

Comments to this Manuals

Related products and manuals for Uninterruptible power supplies (UPSs) APC SUA500PDR