NetShelter SX Networking Enclosure—Unpacking, Installation, and Customization14
4. Remove the screw, latch, and washer from the back of the door handle assembly using the Torx
T30/#2 Phillips wrench (provided). Rotate the washer 90 degrees and the latch 180 degrees and
reattach the latch.
5. Remove the door. See “Removing the doors” on page 12.
6. Remove the hinges from the frame using the Torx T30 /#2 Phillips wrench (provided). Rotate the
hinges 180 degrees, and reinstall them on the other side of the frame of the enclosure.
910a
90°
180°
913a
180°
Comments to this Manuals