APC IN ROW RD ACRD101 User's Guide download pdf (Page 61)

54InRow RD 100-Series and InRow RD 200-Series User’s Guide

Configure or reconfigure the TCP/IP settings locally

1. Contact your network administrator to obtain valid TCP/IP settings.

2. Connect the serial configuration cable (which came with the InRow RD) from an available

communications port on your computer to the serial port of the card or device. Make sure no

other application is using the computer port.

3. From the Start menu, launch the Wizard application.

4. If the InRow RD is not configured, wait for the Wizard to detect it. Otherwise, click Next>.

5. Select Locally (through the serial port), and click Next >.

6. Enter the system IP, subnet mask, and default gateway for the InRow RD, and click Next >.

7. On the Transmit Current Settings Remotely screen, if you select the Start a Web browser

when finished check box, the default Web browser connects to the InRow RD after the Wizard

transmits the settings.

8. Click Finish to transmit the TCP/IP settings. If the IP address you entered is in use on the

network, the Wizard prompts you to enter an IP address that is not in use. Enter a correct IP

address, and click Finish.

9. If you selected Start a Web browser when finished in step 6, you can now configure other

parameters through the Web interface of the device.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 75 76

No comments

APC IN ROW RD ACRD101 User's Guide Page 61