APC MasterSwitch User's Guide download pdf (Page 75)

®®

USER’S GUIDE

masterswitch plus

Event Recipients

Overview

The Web interface and control console both have options that allow you to

define up to four trap receivers and up to four e-mail addresses to be used

when an event occurs that has the SNMP traps or e-mail enabled.

Trap receiver settings

To define which NMSs will receive traps:

• In the Web interface, use the Recipients option of the Events menu.

• In the control console, use the SNMP option in the Network menu.

Choose one of the trap receivers to modify, or select Settings and

enable SNMP access for all trap receivers.

See Event Actions (Web Interface Only)

Item Definition

Community Name This setting defines the password (maximum of 15

characters) used when traps are sent to the NMS

identified by the Receiver NMS IP setting.

Receiver NMS IP Identifies by IP address the NMS that will receive traps.

If this setting is 0.0.0.0 (the default value), traps will not

be sent to any NMS.

Generation (Web interface)

Trap Generation (control

console)

Enables (by default) or disables the sending of any traps

to the NMS identified by the Receiver NMS IP setting.

Authentication Traps Enables or disables the sending of authentication traps

to the NMS identified by the Receiver NMS IP setting.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 117 118

No comments

APC MasterSwitch User's Guide Page 75