APC MasterSwitch User's Guide download pdf (Page 79)

®®

USER’S GUIDE

masterswitch plus

SMTP

Server

Selects one of the following methods for routing e-mail:

• Through the SMTP server provided with the unit (the recommended option,

Local). This option ensures that the e-mail is sent before the 20-second

time-out for the unit, and, if necessary, is retried several times. Also do one

of the following:

• Enable forwarding at the SMTP server provided with the unit so that it can

route e-mail to external SMTP servers. Typically, SMTP servers are not

configured to forward e-mail. Always check with the administrator of your

SMTP server before changing its configuration to allow forwarding.

• Set up a special e-mail account for the unit to forward e-mail to an external

mail account.

• Directly to the recipient’s SMTP server (the Recipient’s option). On a busy

remote SMTP server, the time-out may prevent some e-mail from being

sent, and with this option the unit tries to send the e-mail only once.

When the recipient uses the SMTP server provided with the unit, the

Recipient’s setting has no effect.

Generation Enables (by default) or disables sending e-mail to the recipient.

Format

Selects the format used for e-mail messages:

Short: Identifies only the event that occurred. For example:

MasterSwitch Plus: Outlet 01 on device turned on

Long: Includes information about the unit, and the event. For example:

Name: TestLab

Location: Building 3

Contact: DonAdams

http://139.225.6.133

MasterSwitch Plus Ser #: WS0131005294

Date: 3/10/2003

Time: 16:09:48

Code: 0x120C

Warning - MasterSwitch Plus: Outlet 01 on device turned on

Setting Description

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 117 118

No comments

APC MasterSwitch User's Guide Page 79