APC AP9617 User Manual download pdf (Page 31)

USER’S GUIDE

network management card

Option Settings

TCP/IP

Use this option to enable or disable BOOTP, and when BOOTP is disabled,

to define the three TCP/IP settings that the Management Card needs to

operate on the network.

• The Management Card’s System IP address

• The subnet mask value

• The IP address of the default gateway

When BOOTP is enabled (by default), you can affect only the BOOTP

setting: A BOOTP server will provide the Management Card with its TCP/IP

settings whenever the Management Card is turned on, reset, or rebooted.

Current TCP/IP settings fields. The current values for System IP,

Subnet Mask, Default Gateway, and the Management Card’s MAC

Address are displayed above the TCP/IP settings in the control console

and Web interface.

These options are combined in the Web interface (the TCP/IP

& DNS option) but separate in the control console.

For information about the watchdog role of the default

gateway, see Resetting the network timer.

No comments

APC AP9617 User Manual Page 31