APC AP9617 User Manual download pdf (Page 35)

USER’S GUIDE

network management card

SNMP

An Access option (the Settings option in the control console) enables (by

default) or disables SNMP. When SNMP is enabled, the Access Control

settings allow you to control how each of the four available SNMP channels

is used.

To define up to four NMSs to serve as trap receivers, see

Trap Receiver settings.

Setting Definition

Community

Name

Defines the password (maximum of 15 characters) which an NMS that is

defined by the NMS IP setting below uses to access the channel.

NMS IP Limits access to the NMS or NMSs specified by the format used for the

IP address.

• 162.245.12.1 allows only the NMS with that IP address to have access.

• 162.245.12.255 allows access for any NMS on the 162.245.12 segment.

• 162.245.255.255 allows access for any NMS on the 162.245 segment.

• 162.255.255.255 allows access for any NMS on the 162 segment.

• 0.0.0.0 or 255.255.255.255 allows access for any NMS.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 103 104

No comments

APC AP9617 User Manual Page 35