APC RAID Subsystem SCSI-SATA II User's Guide download pdf (Page 36)

Technical Specifications

96-00290-001 Rev. A1 DataDirect Networks StorageScaler 2460 User Guide | 30

NOTE :

SS2460 enclosures do not support single APC configurations due to thermal

requirements.

NOTE :

In the event of a power supply failure, the blowers in the failed supply will

continue to operate on power provided by the redundant APC unit.

A.2 Regulatory Compliance Statements

Temperature

• Operating: 5 °C to +40 °C

• Storage: 1 °C to +60 °C

• Transit: -40 °C to +60 °C

• Maximum Rate of Temperature Change: 20 °C per hour

Humidity

• Relative Humidity Operating: 20% to 80%, non-condensing

•Maximum Rate of Operational Humidity Change: 10% per hour

• Relative Humidity Storage: 10% to 80%, non-condensing

Altitude

• Altitude Operating: -200 to 10,000 feet

• Altitude Storage: -200 to 10,000 feet

Operational Shock

• 5 G half sine shock with pulse duration of 11 milliseconds or less.

Non-Operational Shock

• Half Sine Shock: 10 G half sine shock with pulse duration of 11 milliseconds or less.

Operational Vibration

• Sinusoidal vibration from 5 to 500 Hz at 0.16 G (0 to peak) at a sweep rate of 0.5 octaves

per minute.

• Random vibration from 5 to 500 Hz at 0.15 G (rms).

Non-Operational Vibration

• Sinusoidal vibration from 5 to 500 Hz at 0.75 G (half-sine) at a sweep rate of 0.5 octaves

per minute.

• Random vibration from 5 to 500 Hz at 0.5 G (rms).

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 45 46

No comments

APC RAID Subsystem SCSI-SATA II User's Guide Page 36