APC 150kVA PDU W/ 480 PRI 208/120 SEC K1 XMER Specifications download pdf (Page 33)

150 kW InfraStruXure Power Distribution Unit 25

Install InfraStruXure Rack-Mount Devices

Install the Rack Automatic Transfer Switches (ATSs)

Install a rack ATS in the top of each enclosure for overhead wiring, and in the bottom of each

enclosure for under-floor wiring.

The rack ATS is an optional component, and is not included with all InfraStruXure systems.

Install the Rack Power Distribution Units (PDUs)

Install rack PDUs in the rear of the NetShelterVX enclosure, in the channel directly behind the rear

vertical mounting rails. For overhead wiring, make sure the power cord is pointing toward the roof of

the enclosure. For under-floor wiring, make sure the power cord is pointing toward the floor.

Install the InfraStruXure Manager and Hub (or Switch)

Install the InfraStruXure Manager in the enclosure located closest to the PDU. The CAT-5 data cables

included with your configuration are of varying lengths, based on the distance components will be

installed from the PDU.

Install the environmental monitoring unit or environmental management system

The environmental monitoring unit and the environmental management system are optional

components, and are not included with all InfraStruXure systems.

See also

See the installation instructions in the manual included with your rack ATS.

See also

See the installation instructions in the manual included with your rack PDU.

See also

See the installation instructions in the manual included with your InfraStruXure

Manager.

See also

See the installation instructions in the manual included with your environmental

monitoring unit or environmental management system.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 55 56

No comments

APC 150kVA PDU W/ 480 PRI 208/120 SEC K1 XMER Specifications Page 33