APC Galaxy 3000 User Manual download pdf (Page 64)

www.mgeups.com

Network

Management Cards

User Manual

THE UNINTERRUPTIBLE POWER PROVIDER

Network Management Card

– User Manual 34003676EN/BB Page 64/76

7. Community Read-Only : public

Enter the name of the read-only community (by default = public)

31 characters maximum

8. Community Read/Write : public

Enter the name of the read/write community. This name is used by the UM-Clients to subscribe to the table of

notified Clients. It is recommended to personalise this name.

Value by default “public”.

31 characters maximum

9. HTTP Login Username : MGEUPS

Text field limited to 10 characters. Enables secure access to the sections of the Configuration menu. Default

value “MGEUPS”.

a. Manager Password : *

Text field limited to 10 characters. Enables secure access to the sections of the Configuration menu. Default

value “MGEUPS”.

b. BOOTP/DHCP Enabled : Enabled

Authorises the configuration of network parameters with your BootP/DHCP as a startup mode (choose enable).

Card operating mode with the server: after all reboots, the card (if this option is enabled), attempts to recover

the network parameters from the server for 10 seconds. If no response is obtained from the server, the card

boots with the last parameters saved from the previous start.

0. Return to previous menu

Goes back to the previous menu.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 75 76

No comments

APC Galaxy 3000 User Manual Page 64