www.mgeups.com
Network
Management Cards
User Manual
THE UNINTERRUPTIBLE POWER PROVIDER
Network Management Card
– User Manual 34003676EN/BB Page 67/76
5.2 Configuration via Telnet
You can access the configuration menu (see “configuration in local mode” section) from a station equipped with
the Telnet protocol.
As soon as the card is accessible on the network, enter the command:
telnet < card IP address > to access the menu.
The password defined by default is MGEUPS.
The card will disconnect automatically after 3 minutes of inactivity.
Comments to this Manuals